Small ERP part2 - Decide optics level of final product

Previous post of part, I create two type workstation.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
One optics(Data) workstation will do this job.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
This a specifica create by quality department before get approve by manager.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
The optics workstation will online to get this specification from system. see as the picture.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E

zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
Well, optics workstation will get this specification from produce plan.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
When PMC get a order from sales department, that they must sent demand for raw materials and supplies to other department to support.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
Then PMC will reply delivery time back to sales department and create produce plan convert from this order.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
Produce plan data flow into system, go next workstation when they finish job, keep this action when product go to optics workstation.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
Optics workstation just get this plan to choose that can use specifications to check those products.zUwWn{wq?L18P#m},K>8IueMj+~ilGc:!R6mZM?*C?UBDr~s.[,I}s[U86i.#s[8F-=~a!E
After check, those products will get a new level from both normal quality and optics quality, and those products become to half products.